1. <p id="ugzbb"><strong id="ugzbb"></strong></p>

      1. <li id="ugzbb"><ruby id="ugzbb"></ruby></li>

        咨詢熱線: 13896006908

        Contact us 聯系我們

        重慶豐正機械有限公司

        聯系人:朱經理

        手機:13896006908

        電話:023-67188505

        傳真:023-67188506

        地址:重慶市渝北區回興工業園區蘭馨大道2號

        可調多軸器

        (中切削)U型圓型可調多軸器

        (Medium cutting)Type U round shaft multi-spindle tool

        ◎本體結構利用齒輪箱配合萬向節頭所組成,容易調整加工孔距不受齒輪所限制,節省調整的時間,也少有死角的限制,適合加工接近圓周分布孔的工作,是可調式中最容易操作使用的規格。為保萬向節頭之壽命,移動范圍不得超過15度,等于垂直之前後左右30mm以內。

        (盡量配合工作之孔距坐標,設計齒輪箱結構即定鏜孔位)The distance of hole will be easy to control and not to be restricted by gears.

        ◎The basic frame consists of gear case and cardan joint.The distance of hole will be easy to control and not to be restricted by gears.The set up time is thus saved and it is mostly free of dead angles.It is very suitable for working of round holes and is the easiest tooperate among the adjustable type.To ensure the lifetime of the cardan joint,the moving range should be confined within 15 degrees,which means within a distance of 30mm to the vertical status.

        (We will design the structure of gear case,that is,the position of the boring hole as much as possible according to the coordinate of per hole.)

        咨詢熱線:

        13896006908

        在線咨詢
        規格參數

        ※萬向節注意事項:

        1調整時不能超過規定的角度15度

        2如超過此極限。心軸易磨損或斷裂

        3工作時應經常加潤滑油脂

        ※Note of cardan Joint

        1.Do not set the angle to more than the specifled l5 degrees.

        2.If the limit is exceeded,the shaft will be easy to wear or break.

        3.During work,lubrication should be added frequently.

        型號 Type

        SU80

        SU110

        SU165

        SU200

        SU250

        SU300

        筒夾規格Collet/

        最大鉆孔能力

        Max.Drilling Capacity

        D4

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ERll/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        ER8/5  C5/5

        ER11/7 C6/6

        ERl6/10 C9/9

        ER20/13

        C12/12

        轉速比

        Gear Ratio

        1∶1

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        1∶1

        1∶2

        最小距離(二軸間)

        Lowest Distance(Two Spindle)

        10

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        13(ER8  C5)

        18(ER11 C6)

        26(ER16 C9)

        28(ER20 C12)

        最大軸心范圍

        Max.Range of Centers

        80

        110

        165

        200

        250

        300

        軸數Spindle

        2-4

        2-6

        2-10

        4-12

        4-12

        4-14

        掃一掃

        重慶豐正機械有限公司

        在線咨詢

        咨詢熱線:023-67188505

        QQ咨詢 QQ咨詢
        人妻熟妇乱又伦精品视频|2020国产情侣在线视频播放|欧美影片一6060黄色第一页茄子视频|国产女女百合av大片在线观看
        1. <p id="ugzbb"><strong id="ugzbb"></strong></p>

          1. <li id="ugzbb"><ruby id="ugzbb"></ruby></li>